Focus on occupied zones围绕人员区域布置
Plan misting around workstations, passages or roof lines where cooling is actually needed.优先围绕工位、通道或屋顶管线布置，避免无效覆盖。
Factory Cooling工厂降温
Workshop cooling misting system for occupied zones, roof lines and work areas, matched by pressure, line length and nozzle output.用于车间、生产区和高温作业环境的喷雾降温配套方案。
How to use this system系统使用要点
Keep the decision simple: layout, nozzle effect, and project conditions.先看管路布局、喷头效果和项目条件。
Control water drift控制飘水
Choose nozzle output and installation direction to reduce water drift near machines and goods.根据设备和货物位置调整喷头流量和方向，减少飘水。
Confirm power and pressure确认主机条件
Before quotation, confirm workshop size, water source, power supply and expected operating hours.报价前确认车间尺寸、水源、电源和每天运行时间。
Heat Reduction Goal
Start with the workshop size, heat source, airflow, and target cooling area instead of selecting nozzles alone.
Line and Pump Matching
Pump pressure, tubing route, fittings, and nozzle spacing should be matched as one factory cooling system.
B2B Supply Fit
Factory cooling pages should attract installers, industrial suppliers, and project buyers who need repeatable component packages.
Project requirements项目需求重点
Confirm the site environment, tubing layout, pressure and target coverage before selecting components.选型前先确认现场环境、管路布局、压力和覆盖范围。
System Planning系统规划
Recommended planning sequence推荐规划顺序
- Confirm factory area and heat source
- Define cooling zones and airflow
- Plan rigid PA tubing route
- Select nozzle spacing and pump pressure
- Quote matched nozzles, fittings, tubing, and pump unit
Matched Components匹配配件
Components normally quoted for this application这个场景通常一起报价的配件
Misting NozzlesYC3010 High Pressure Anti-Drip Misting NozzleYC3010 高压防滴漏雾化喷头Misting NozzlesYC2010 High Pressure Anti-Drip Misting NozzleYC2010 高压防滴漏雾化喷头Misting NozzlesTW3010 High Pressure Misting NozzleTW3010 高压雾化喷头
High Pressure NozzlesThree-Stage Ceramic High Pressure Misting Nozzle三段式陶瓷高压喷头
High Pressure NozzlesTwo-Stage Ceramic High Pressure Misting Nozzle两段式陶瓷高压喷头
High Pressure NozzlesBrass Two-Section High Pressure Misting Nozzle黄铜二节高压喷头
14 more matched components can be quoted together after you share the project layout.还有 14 个配套产品，可根据项目管路一起报价。
FAQ常见问题
Application buying questions应用采购常见问题
How is factory cooling different from dust suppression?
Factory cooling focuses on heat reduction and worker comfort, while dust suppression focuses on capturing dust at the source. The component set can overlap, but layout priorities differ.
What components are used in factory cooling misting?
A system usually uses pump units, rigid PA tubing, quick-connect fittings, and misting nozzles matched to workshop size and airflow.
Which factories need mist cooling components?
Workshops, warehouses, production lines, open factories, and hot industrial spaces can use mist cooling systems.